Product overview
CHEMGUARD BRAHMA single-waterway manual monitors provide a swivelling discharge platform for selected water and foam applications. The manufacturer page covers both 3-inch-waterway 1250 gpm configurations and larger 4-inch-waterway 2000 gpm models. These capacities and outlet sizes are model-specific. The selected nozzle, inlet flange and hydraulic supply determine the assembled duty and reaction loads. Lubricated swivel joints and a positive rotation lock support positioning and maintenance. Confirm the exact model and mounting design rather than combining the largest capacity and smallest connection from different family members.
Technical specifications
| Brand / product range | CHEMGUARD |
|---|---|
| Product / system | BRAHMA Manual Monitor |
| Product type | Foam Systems |
| Product family | Foam Discharge Equipment |
| Subcategory | Nozzles / Monitors / Eductors |
| Documented family | BRAHMA manual single-waterway monitors |
| 1250 gpm models | CM-1250B-3 and CM-1250B4S |
| 1250 gpm waterway | 3 inches / approximately 76 mm |
| 1250 gpm outlet | 2½ inch MNST |
| CM-1250B-3 inlet | 3 inch flange |
| CM-1250B4S inlet | 4 inch flange |
| 2000 gpm models | CM-2000B and CM-2000H |
| 2000 gpm waterway / inlet | 4 inch waterway and 4 inch inlet flange |
| 2000 gpm outlet | 3½ inch MNST |
| Construction | Corrosion-resistant brass with stainless-steel ball bearings at swivel joints |
| Movement | 360° horizontal rotation with positive lock; 150° vertical travel in the source |
| Maintenance | Grease fittings at swivel joints |
| Flow scope | Published maximum flow is not a pressure-independent guarantee; confirm the model/nozzle hydraulic duty |
Key features
- Documented family: BRAHMA manual single-waterway monitors
- 1250 gpm models: CM-1250B-3 and CM-1250B4S
- 1250 gpm waterway: 3 inches / approximately 76 mm
Applications
Appropriately engineered industrial, marine and offshore water or foam monitor arrangements. Verify nozzle compatibility, inlet flange, mounting loads and the current approval scope of the complete assembly.
Selection and project integration
Provide UDCT with the fuel or test application, required capacity, available water pressure and flow, selected concentrate and compatible equipment. Confirm the exact part numbers, coupling threads, storage conditions and current manufacturer instructions. For foam systems, use the fuel-specific application criteria and approved proportioning/discharge assembly; commissioning must verify the actual hydraulic and proportioning performance.
Manufacturer documents
Official product reference
View this product on the manufacturer website (opens in a new tab)