Product overview
The VES VF3054-16 is a single-action conventional manual pull station with a die-cast enclosure and two Form C contacts. Its dedicated technical sheet identifies hazardous-location classifications and an outdoor enclosure rating for the listed model. Selection must confirm the exact location classification, electrical load, installation method and current approval evidence before procurement.
Technical specifications
| Brand / product range | VES |
|---|---|
| Product / system | VF3054-16 Explosion-Proof Manual Pull Station |
| Product type | Fire Detection |
| Product family | Fire Detection & Alarm |
| Subcategory | Conventional |
| Model | VF3054-16 |
| Action | Single-action conventional manual station |
| Switch | DPDT, two Form C contacts |
| Contact rating | 10 A at 120/240 V AC, as stated in dedicated model sheet |
| Construction | Die-cast metal housing, corrosion-resistant finish |
| Terminals | 12–22 AWG |
| Dimensions | 4.75 x 3.125 x 3.375 inches |
| Operating temperature | −30°F to +150°F (manufacturer also quotes −35°C to +66°C) |
| Humidity | Up to 95%, non-condensing |
| Manufacturer-listed classifications | Class I Groups B/C/D; Class II Groups E/F/G; Class III; 4X outdoor, exact listed model and installation scope applies |
| Reset | Key-locked |
| Accessory | Optional glass break rod |
Key features
- Model: VF3054-16
- Action: Single-action conventional manual station
- Switch: DPDT, two Form C contacts
Applications
Manual fire alarm initiation in a classified location only where the exact product listing and installation method match the site hazardous-area assessment.
Selection and project integration
Share the fire alarm drawings, equipment schedule, compatible panel platform and cause-and-effect requirements with UDCT. Selection should confirm device protocols, supported interfaces, circuit supervision, power and standby calculations, and the exact enclosure or module arrangement.
Use the current manufacturer documentation to check compatibility, wiring limits, software requirements and approval scope. Commissioning should verify the configured alarm, fault, indication and control functions as part of the complete system. Remote reporting also requires a compatible receiving service and confirmation of local network availability.
Manufacturer documents
Official product reference
View this product on the manufacturer website (opens in a new tab)