Product overview
The VES VF5667 VES95A relay output module provides a dual Form C voltage-free switching interface controlled by compatible fire alarm equipment. It uses loop power and includes a status LED that indicates polling and the configured active state. The selected contact duty must be checked against the full installation documentation because the linked summary sheet does not publish a relay-load rating. Coordinate the interface with the approved cause-and-effect schedule and the requirements of the connected equipment.
Technical specifications
| Brand / product range | VES |
|---|---|
| Product / system | VF5667-00 VES95A Relay Output Module |
| Product type | Fire Detection |
| Product family | Fire Detection & Alarm |
| Subcategory | Apollo Modules |
| Model | VF5667-00 |
| Function | Dual Form C voltage-free relay output |
| Power | Loop powered |
| Working voltage | 17–28 V DC |
| Modulation voltage | 5–9 V peak to peak |
| Supervisory current | 0.85 mA |
| Surge current | 2.5 mA |
| Maximum alarm current | 3.5 mA |
| Dimensions | 4.5 x 4.5 x 1 inches |
| Mounting | Two-gang or 4 inch square electrical box |
| Temperature | 32°F to 120°F |
| Humidity | 10–93%, non-condensing |
| Indicator | One red LED with polling / configured active-state indication |
| Contact-load selection | The linked summary sheet does not state a contact-load rating; obtain the installation instructions and confirm the connected load before selection |
Key features
- Model: VF5667-00
- Function: Dual Form C voltage-free relay output
- Power: Loop powered
Applications
Configured ancillary switching interfaces in compatible addressable systems, after confirming contact ratings, permitted use and any required supervision for the connected equipment.
Selection and project integration
Share the fire alarm drawings, equipment schedule, compatible panel platform and cause-and-effect requirements with UDCT. Selection should confirm device protocols, supported interfaces, circuit supervision, power and standby calculations, and the exact enclosure or module arrangement.
Use the current manufacturer documentation to check compatibility, wiring limits, software requirements and approval scope. Commissioning should verify the configured alarm, fault, indication and control functions as part of the complete system. Remote reporting also requires a compatible receiving service and confirmation of local network availability.
Manufacturer documents
Official product reference
View this product on the manufacturer website (opens in a new tab)